optical fiber High Speed with Ether. 4K@60Hz kabel 3m, M/M, gold-plated connectors

Key Functions

• HDMI 2.0b High-Speed Active Optical Fiber Cable
• Supports Ultra High Definition resolution 4K@60Hz (2160p @ 60Hz), YUV 4:4:4
• Maximum data transfer: 18 Gb/s (600MHz) HDMI 2.0 or 10.2Gb/s HDMI 1.4
• Hybrid optical cable with a diameter of 4.5mm - 4x OM3 optical fibers + 7x conductors
• Gold-plated connectors: HDMI type A (19 pins) male <=> HDMI type A (19 pins) male
• Resolution: 3840 × 2160 pixels at 60Hz or lower supported formats 1080p FULL HD/1080i/720p/720i
• Optical cable is backward compatible with HDMI 2.0a, 2.0, 1.4, and lower versions
• Supports ARC, HEC, EDID, DDC
• Supports CEC (Consumer Electronics Control)
• Supports HDR (High Dynamic Range)
• Supports 4:4:4 color subsampling
• 3D video via HDMI connection
• Supports HDCP 1.4/HDCP 2.2
• Multi-Dimensional Audio Formats Supported (Dolby Atmos and DTS:X, etc.)
• Dolby TrueHD and DTS-HD Master Audio Bitstream Compatible
• Supports Audio Return Channel (ARC)
• Compatible with HDMI Ethernet Channel (HEC)
• Support EDID
• Complete power from HDMI bus consumption less than 250mW, no external power required
• Optical cable thickness 4.6mm
• Optical fiber: OM3 Multimode Fibre Optic
• Gold-plated connectors in metal housings
• Flexible optical cable for a small bending radius: 20mm, optical cable cross-section: 4.6mm
• Color black
• Optical cable is wound and labeled with description and EAN code
• Cable length: 3m

The cable contains active electronics that only work in one direction of the signal. The cable must always be connected with the devices turned off and only in the direction indicated on the cable. The connector marked "Source" should always be connected to the transmitting device (DVD, Blu-ray). The connector marked "Display" should always be connected to the display device (LCD, television, projector).