StudioKing Slave Flash D-120 E27 120Ws

The Studioking D-120 is a 120 Watt-second strong slave flash with E27 thread connection. The D-120 is equipped with a built-in slave receiver: an eyelet that allows the flash to react to other flashes. The slave function can detect other flashes up to a distance of about 15m (without obstacles).

Using the rotary knob you can adjust the power of the torch. The colour temperature of the light is approximately 5500 to 6000K, or daylight. By means of the Ready light you can see when the flash is charged again. The charging time is approximately 1 to 3 seconds, depending on the set power. You can also set the light in advance by using the test button. Using the 'P. Cell' button you can disable the slave function, so that the flash will not react to other flashes.

E27 connection
On the underside, the unit is equipped with an E27 connection. This allows you to connect the flash to the standard E27 lamp holders. The lamp holder is not included; it is available as an option.

Usage with other flash units
When multiple studio flash units are used, it is common to connect one flash unit to your camera using a cable or wireless trigger set. The other flash units (such as this Studioking D-120) can then flash automatically using the slave function.

Application Studioking D-120

You can use the flash as a background flash to create extra light or, for example, to flash away shadows. The D-120 can be used for product or portrait photography, for example. You can fire the flash using the slave function, a 3.5mm sync cable (not included) or on the device itself using the test button. To soften or control the light, you can use a variety of accessories, such as a softbox, honeycomb, snoot or flash umbrella (see optional accessories). Using adapter rings, you can also attach accessories with a Bowens connection to the flash.