optical fiber High Speed with Ether. 4K@60Hz cable 25m, M/M, gold plated connectors

Optical HDMI 2.0 Ultra High Speed 4K@60Hz cable is used to connect two audiovideo devices via modern HDMI interface, such as HD-DVDBluRay player and LCDPlasma TV.The cable transmits digital audio and video and supports HDCP digital content protection. - HDMI 2.0b High Speed Active Optical Fiber Cable- Supports Ultra High Definition resolution 4K@60Hz (2160p@60Hz), YUV 4:4:4- Maximum data transfer: 18Gbs (600MHz) HDMI 2.0 or 10.2Gbs HDMI1.4- 4.5mm diameter hybrid optical cable - 4x OM3 optical fiber + 7x conductors- Gold plated connectors: HDMI type A (19pin) male <=> HDMI type A (19pin) male- Resolution: 3840×2160 pixels at 60Hz or lower supported formats 1080p FULL HD1080i720p720i- Optical cable is backward compatible to HDMI 2.0a, 2.0, 1.4 and below- Supports ARC, HEC, EDID, DDC- Supports CEC ( Consumer Electronics Control )- Supports HDR (High Dynamic Range)- Supports 4:4:4 Color Subsampling- 3D video over HDMI connection- Supports HDCP1.4HDCP2.2- Multi-Dimensional Audio Formats Supported (Dolby Atmos and DTS:X etc.)- Dolby TrueHD and DTS-HD Master Audio Bitstream Compatible- Supports Audio Return Channel (ARC)- Compatible with HDMI Ethernet Channel (HEC)- Support EDID- Complete power supply with HDMI bus consumption less 250mW, no need external power supply- Optical cable thickness 5.2mm- Optical fiber: OM3 Multimode Fibre Optic- Gold-plated connectors in metal caps- Flexible fibre optic cable for small bend radius: 20mm, fibre optic cable cross section: 4.6mm- Colour black- The fibre optic cable is coiled and labelled with a description and EAN code- Cable length: 25mThe cable contains active electronics that only work in one signal direction.The cable must always be plugged in when the devices are switched off and only in the direction marked on the cable.The connector marked "Source" is always plugged into the transmitting device (DVD, Blueray).The connector marked "Display" is always plugged into the display device (LCD, TV, projector). - High-speed HDMI 2.0b active optical fibre cable with gold-plated connectors- Supports Ultra High Definition 4K@60Hz (2160p@60Hz), YUV 4:4:4- Maximum data transfer: 18 Gbps (600 MHz) HDMI 2.0 or 10.2 Gbps HDMI1.4- Hybrid 4.5mm optical cable - 4x OM3 optical fiber + 7x conductors- Gold plated connectors: HDMI type A (19pin) male <=> HDMI type A (19pin) male- Resolution 3840×2160 pixels at 60Hz or lower supported formats 1080p FULL HD1080i720p720i- Optical cable is backward compatible with HDMI 2.0a, 2.0, 1.4 and below- Supports ARC, HEC, EDID, DDC- Supports CEC ( Consumer Electronics Control )- Supports HDR (High Dynamic Range)- Supports 4:4:4 Color Subsampling- 3D video over HDMI connection- Supports HDCP1.4HDCP2.2- Supports multi-dimensional audio formats (Dolby Atmos and DTS:X etc.)- Dolby TrueHD and DTS-HD Master Audio bitrate compatibility- Audio Return Channel (ARC) support- HDMI Ethernet Channel Compatibility (HEC)- EDID support- Complete power supply with HDMI bus consumption less than 250 mW, no external power supply required- Optical cable thickness 5.2 mm- Optical fiber: OM3 Multimode Fibre Optic- Gold-plated connectors in metal caps- Flexible fiber optic cable for small bending radius: 20 mm, fiber optic cable cross section: 4. The cable contains activeelectronics that operate in only one signal direction.- Color black- Optical cable is coiled and marked with a description and EAN code- Cable length: 25 mThe cable contains active electronics that only work in one signal direction. the cable must always be plugged in when the devices are switched off and only in the direction marked on the cable.The connector marked "Source" is always plugged into the transmitting device (DVD, Blueray).The connector marked "Display" is always plugged into the display device (LCD, TV, projector).